Computer Printer Repair

Printers undoubtedly form the most basic form of accessory for a home or an office, be it a small office or a big brand organization. You can find a lot of different types of printers such as inkjet printers, laser printers, dot matrix printers and many others at places all around you. You can easily purchase a printer as there are a lot of printers available at very affordable prices. However it has often been observed that printers start to show certain glitches or problems soon after purchase and being used for a short span of time. This is the reason why printer repair services are important.

There is yet another very important reason why these printer repair services are important for you. This is due to the fact that the printers available these days in the market are highly technology intensive. What this means is that any problem or glitches occurring with the printer are highly technology related and this is the reason why you require someone with great technical expertise to cure your printer and repair it off the glitch.

There are certain small glitches and everyday problems which can be very easily repaired by the users itself. For example, you do not need to call for printer repair services for clearing out a paper jam or the condition where the printer runs out of paper for printing. The need for these printer repair service arises for the bigger and the more complex problems related to printers which cannot be catered to by everyday users and need expert attention.

Apart from the times when it presents problems, it is also advisable to call for printer repair services on regular basis for maintenance as well as checks on them. Finding a good repairman is a necessity if you are running a business.

Read More: http://goo.gl/S6AMa

Nothing irritates you more than a faulty printer. This creates a need for troubleshooting printing problems. However, you will never want to give your printer in anyone’s hand but an expert.

Well! You can contact technical support resources to get your printer repaired in no time. They have got the technicians who are dedicated to bringing you solutions for your technical problems; be it related to computer or peripheral. You can also visit forum, blogs and many articles that relating to printer support as well as printer repair and general repair answers.

Using their expertise, these online techs can revitalize your printer’s performance and stability. The basic array of service can include: fixing printer errors, printer set up and installation, driver up-gradation, printer support and maintenance.

Whether you're a beginner or expert, home or small business, online technical support resources are all you need to resolve all your PC problems and multifunctional printer support very fast. Fix it yourself or you can have them fix it for you. Either way, they will be there for you until the problem is completely solved.

There are some things which are more irritating than having to deal with an infected printer. And it’s obviously none other than a malfunctioning computer. Erroneous software, accidental virus & spyware, pesky errors and hardware defaults can contribute to this irritation.

From small to mid size business to individual home computer user, every computer enthusiast needs a quick and affordable resolution to come out of technology dilemmas. And the task can be simplified with online technical support centers. With them, you can have a remedy to most irksome technology errors. These online services are available for 24/7.

Online technicians may address your computer problems remotely by connecting directly to your computer via the Internet as well as over the phone. These computer technicians take you through the step-by-step process which acquaints you with the complexities involved within your machine.

All these technicians are highly qualified and take proper care to not to leave any loose end for customers to complain. With online vendors, you get both quality and expertise on hand. This is known as getting real value of your money.

source: http://www.articlesbase.com/hardware-articles/how-to-fix-your-printer-problems-868569.html

This post provides printer support to general troubleshooting of Dot Matrix Printers.
• If the printer self-tests OK but will not print jobs from the computer, check the following:

• Dip switch settings
• Proper driver for your application software
• Bad or disconnected cable

• Some printers have both serial and parallel connections. If one doesn't work, change cables and try the other. Be sure to change any dip switch settings needed by the printer to recognize the change. If this works, you may have had a physical problem with the output port on the computer or the input port of the printer that you tried the first time.
• If a dot matrix printer shuts down and recovers frequently, it may be having problems with its "thermistor". A thermistor is a device used to keep the printer from overheating. Try replacing this part before you replace the entire print head.
• Some printers can be set by dip switches for unidirectional or bidirectional printing. Bidirectional is normally faster, but might cause problems with graphic output for some combinations of applications and printers. If you suspect this problem, reset your dip switches for unidirectional printing.
• If your output is double-spaced when you expect single-spaced, you may be getting an extra Carriage Return and Line Feed at the end of every line.Reset the dip switch(es) controlling this.
• If your print quality is poor, first check the ribbon for wear. Also examine the print head spacing. Your head may be too far away from the platen for your current paper thickness. If adjusting the spacing doesn't solve the problem, clean the print head itself with a cotton swab dipped lightly in alcohol.

This Post provide printer support to print CD/DVD Label I try to describe step by step instruction

To begin printing on a CD or DVD, press the CD Print button.

Printing directly onto a CD or DVD using the Epson Stylus Photo RX680 inkjet printer couldn’t be easier, and the results are fantastic. This Step-By-Step guide will demonstrate how to do it. Note that you need to make sure the CD or DVD you’re using can be printed on; check the label before you buy. Also, make sure you have already burned to the disk; once you’ve put the label on, you can’t burn data to the disk.

To begin the process of printing directly onto a CD or DVD, press the CD Print Tray button. This will raise the CD/DVD tray to raise into position.

Load the CD or DVD into the holderLoad the CD or DVD onto the holder. The white side should be facing up. Remember that the disk should already be full of data; once you print on it, you won’t be able to burn data to it.

Load holder into the printer tray














Slide the holder into the CD/DVD tray to left of the arro

Press OK to get the disk in place for printingPress OK to get the disk in place for printing.


Choose the photo you want to use as the label

Choose the photo you want to print as the label. In this example, the memory card (in red box) holds the image I want to print, but you can get the image from your computer as well. If the image needs any simple editing, use the Auto Correct function. You’ll be able to move the outline of the CD around the photo here, or make the image bigger or smaller to fit better. Remember that nothing will print across the center.

Press StartPress Start and the printing will begin.

Remove CD from the tray
When it finishes printing, remove the CD or DVD from the tray and you're finished!

This post privide tips to fix Printer error, If You cannot add a printer, unable start print job Lexmark print service LexBce Server lexmark printer
Error: Spooler subsystem app has encountered a problem and needs to close. Operation could not be completed. unable start print job Lexmark print service LexBce Server lexmark printer

This issue may occur if a third-party printer driver or a third-party service that is installed prevents you from adding printers, or if the third-party printer driver or the third-party service affects the functionality of a newly installed printer.

For example, this issue may occur if the Lexmark print service (LexBce Server service) is installed and is running on your computer before you try to add another printer.

Resolution
You may experience any of the following symptoms on your Windows XP-based computer:

? After you start your computer, you may receive the following error message:
Spooler subsystem app has encountered a problem and needs to close.
? When you try to start the Print Spooler service, you may receive the following error message:
Spooler subsystem app has encountered a problem and needs to close.
? When you try to stop the Print Spooler service, you may receive the following error message:
Spooler subsystem app has encountered a problem and needs to close.
? When you click Start, and then click Printers and Faxes, you may receive the following error message:
Spooler subsystem app has encountered a problem and needs to close.
? When you click Start, and then click Printers and Faxes to try to view your printers, no printers appear. This issue may occur even if you have a printer installed.
? When you click Add a printer, or when you try to print, you may receive the following error message and cannot add a printer:

Operation could not be completed.

For More Information Contact to Printer Support Expert Here

This post provides printer support to reinstall WinFax printer. It describe step by step instruction to reinstall WinFax printer.

To reinstall the WinFax printer
Close the WinFax Message Manager and WinFax Controller.
If you are running Windows NT, 2000, or XP, stop the WinFax service.
Start Windows Explorer and go to the Insprint.exe file. The default location of this file is on the C:\Program Files\Winfax folder or a subfolder of the Winfax folder.
Double-click the Insprint.exe file. The printer driver files are reinstalled. If you see a message that printer driver files have been installed, click OK.
Restart the computer.

More Printer Search
Solving Print Spooler Problems
computer printer repair
HP DeskJet Printer Driver Support

The 0x00000000 error is one of the great banes of Windows users around the world. It’s about as cryptic as a Windows error can possibly be, and as a result, you’ll find endless pages upon pages of different solutions on the official Microsoft website. When you get a 0x00000000, you’ll find that it’s nearly always accompanied by another error code and a message.

Unfortunately, sometimes that message looks like this:

“A problem has been detected and Windows has been shut down to prevent damage to your computer”.

Now, as you can see by that, the 0x00000000 can become a terminal death sentence to your home computer if it isn’t resolved quickly. Thankfully, we can at least mark down one area where the 0x00000000 error is more common than others. That area is the memory. You may have noticed that when you first run Windows after bringing a computer home, everything is smooth and everything flows perfectly. Well, after a few weeks, the computer begins to lose its optimal performance. This is because the more we use an operating system, the more references it gains in its Windows registry and the more likely it is to become suspect to corrupt memory.

Corrupt memory can be passed on my bad RAM in the computer itself, or it can also be more evidently encountered on the operating system level with regards to the Windows registry. Always keeps a registry cleaning utility handy as it will become a life saver in certain instances of the 0x00000000 error arising.

In fact, your first port of call when you get a 0x00000000 error should be to check on the registry. Run a scan and repair any bad entries.

These bad entries are most likely caused by recent installations of new hardware – such as printers, scanners, webcams and the like. Even if the registry appears to be fine, you can pick up 0x00000000 errors just by having different devices interfering with each other. Assuming you’ve installed a new hardware device before the 0x00000000 error, go back and uninstall it completely. Now run a system scan to remove spyware or corrupt registry entries.

Install the hardware device from scratch following word for word the instructions that the manufacturer has given. Then go on to the manufacturer’s website and download the latest patches and drivers. This will ensure that you’re completely up to date and running of the most suitable drivers for your hardware. If you still can’t get rid of the 0x00000000 error, it’s likely that the problem is rooted to the system itself.

You will need to ensure that your cache is running correctly for hardware and the processor itself. In a worst case scenario, you may need to send the PC for repair. This is particularly likely if the 0x00000000 error is stemming from a problem with the System bus or CPU.

As you can see, the possibilities for the root of your 0x00000000 problem are quite– viruses and bad registry entries – we can know for sure whether further assistance is required on a professional level.

Some Related Topic
Printer Repair and Troubleshooting
Online Printer Support

Printer drivers are not responsible for publishing a print queue to Directory Services. The Microsoft Windows 2000 and later print folder creates a print queue object (by calling the spooler's SetPrinter function) during the process of installing the printer.


Print queue properties are published so that a user can search for printers with particular properties by using the Search option on the task bar's Start menu. The print folder publishes some, but not all, of the printer capabilities that are available to it from DriverCapabilities. Only capabilities that are considered useful for browsing purposes are published.

Printer drivers can add or modify a print queue object's property information. The print queue properties that can be published are identified by SPLDS_-prefixed constants, defined in winspool.h. To add or modify printer properties, your driver must use these predefined property name identifiers.

To add or modify a print queue object's property information, carry out the following steps:

1. Add property names and values to the registry, under the SPLDS_DRIVER_KEY, by calling the spooler's SetPrinterDataEx function.
2. Call the spooler's SetPrinter function, with an input structure of PRINTER_INFO_7 (described in the Windows SDK documentation) and an action of DSPRINT_UPDATE, to inform the spooler that it should update the published print queue object. (Drivers should not specify an action of DSPRINT_PUBLISH.)

These steps should be implemented within the printer driver's DrvPrinterEvent function, when the function receives a PRINTER_EVENT_INITIALIZE event.

If a driver must obtain the current values for a printer's published properties, it should call GetPrinterDataEx or EnumPrinterDataEx to obtain the information from the registry, which is spooler-maintained and always up to date. An alternative way is to call GetPrinter to obtain the print queue's object identifier and then to call ADSI functions to obtain the values of the published properties. This technique is not recommended, both because it is more resource intensive and because returned data might not always be current.

Laser Printer Repair Service & troubleshooting Center for Laser Printer Services, Printer Cartridges, Refurbished Printers and driver. We service and stock parts for Printers, Plotters, Copiers, and Fax Machines. We service and repair HP Printers (Hewlett Packard), Xerox, Lexmark, Epson, and more.

Call Us Toll Free : 1 800 237 3901

iYogi is Laser Printer Repair provides corporations, small businesses and individuals with certified on site, in home, and carry in printer repair services and upgraded printer parts. Our qualified technicians provide services that include printer repair, printer cleanings, original printer repair maintenance kits, fax & officejet repair, large format printer repair and factory printer warranty support.

If you're getting a Ink cartridge error
If this is a new cartridge, open the front cover and remove all cartridges. Be sure the protective film has been removed from the cartridge prior to printer installation. Inspect the contacts on the new cartridge for damage. Replace the cartridges in the correct place, close the front cover and power the printer down and then up again.

Printer Cannot Be Installed
If you're trying to install a printer and it will not install, be sure to check the Device Manager in the Control Panel for any Unknown Devices. Your printer will be come an Unknown Device if you plug the cable in before installing the driver software. Remove the Unknown Device and then unplug the USB cable. Next, install the software that came with the printer, and when finished, plug the USB cable back in.

Printer Streaks
If your printer is producing a streaked image, you will need to clean the printer heads. To do this, go to Printers in the Control Panel, then right click your Printer then select Properties. A menu with the various settings will appear. You need to select Clean Printer Cartridges. The printer will run in cleaning mode.

Printer Does Not Print Jobs
When you click Print and nothing happens, you may be sending jobs to a printer that is not connected to your computer. For example, if another printer was previously installed, and you install a new printer, the old printer might still be setup as the Default Printer. Go into the Control Panel, then Printers and make sure the new printer is set to Default.

Printer Jams Frequently
If your printer jams frequently, you may be loading too much paper. This can also occur if you've had jams in the past and have a piece of debris still stuck in the printer. Use a flashlight to examine the entire mechanism to ensure no paper is still inside. This can also happen if an internal gear is damaged. You will often notice one side being fed faster than the other. This could me the printer is physically damaged and needs to be replaced or repaired.


Back To Printer Support

Operation could not be completed. The print spooler service is not running.This error occurs because the Spooler service has not been started or has stopped working.This post provide printer support to start the spooler services.

To Start Spooler Services follow the step

1. Click Start , and then click Control Panel .
2. Double-click Administrative Tools , and then click Services .
3. Double-click the Printer Spooler service, and then change the startup type to Automatic . This sets the Spooler service to start automatically when you restart the computer.
4. If you want to start the spooler service immediately, click the Start button under the Service Status field.

For More About this problems go to Print Spooler Service Problem

In this post you get further information about Postscript printer support and how to Windows NT supports PostScript printers that uses industry-standard PostScript Printer Description (PPD) files. Windows NT installs PPD files using PRINTER.INF. This post provides detailed instructions on how to modify PRINTER.INF so that you can install PPD files obtained from print device manufacturers.

Follow the steps to install PPD files from print device manufacturers:

1. Obtain the OEMSETUP.INF from the DDK in the
\WINNT.NT\WINNT351.DDK\DDK\SRC\SETUP\INF\PRINTER directory.
Rename the file to PRINTER.INF.

-or-

Obtain PPDInst.exe from the Microsoft Download Center. http://download.microsoft.com/download/winnt351/driver/11/n351/en-us/ppdinst.exe
2. Create a file called DISK1. The content does not matter. The Setup procedure only checks to make sure it exists. If you perform the installation on a non-Intel (x86) computer, name the file CDROM.W.
3. Copy DISK1 (or CDROM.W), the PRINTER.INF file and your PPD file to a floppy disk or a sub-directory on your hard disk.
4. Copy PSCRIPT.DLL, PSCRPTUI.DLL and PSCRIPT.HLP from an existing Windows NT installation to the floppy disk or the sub-directory on the hard disk. If you install support for Intel-based (x86) computers, look for these files in the following directory:

%SYSTEMROOT%\SYSTEM32\SPOOL\DRIVERS\W32X86\1
5. The PRINTER.INF file installs support for one particular printer: the HP LaserJet IIISi. To install support for your printer, do the following:
1. Change each reference of RASDD to PSCRIPT and RASDDUI to PSCRPTUI.
2. Modify the following section using a text editor, such as Notepad:

[Files-PrinterData]
hppcl5ms = 1,hppcl5ms.dll , SIZE=999

Change the file name (for example: HPPCL5MS.DLL) to match the name of the PPD file of your printer. HPPCL5MS is an identifier and it does not require any change for your new PPD file name.
3. If you change the identifier, you must also change it in the [Options] section below:

[Options]
"HP LaserJet IIISi" = rasddui, hppcl5ms, rasdd

Change HP LaserJet IIISi to match the name of your printer. To determine the name, open the PPD file for your printer using a text editor and search for the NickName. If you have changed the identifier above, then you must change it in the following section:

[OptionsTextENG]
"HP LaserJet IIISi" = "OEM HP LaserJet IIISi"
6. In the [ProductType] section, make sure that STF_PLATFORM is correctly set for your computer, as follows:

STF_PLATFORM = x

where x is Mips, I386, Alpha or PPC (PowerPC).
7. If you are not installing the PPD file on an Intel-based computer, change the following line in the [Source Media Descriptions] section from DISK1 to CDROM.W:

1 = "OEM Disk (PRINTER)" , TAGFILE = disk1

8. Start Windows NT Print Manager. From the Printer menu, select Create Printer.
9. Enter the printer name and select a port.
10. For Driver, select Other. Enter the drive and path of the printer driver disk (the same directory on step 3 above).
11. In the Select Driver dialog box, select the driver and click OK.
12. In the Windows NT Setup dialog box, enter the drive and path of the printer driver disk (the same directory on step 3 above) and click Continue.

NOTE: If you supply the Windows NT CD-ROM path instead of supplying the driver disk path, the Setup program will successfully copy the PostScript files, and then prompt for the directory where the PPD file is located. At this point, the path cannot be changed back to the disk directory and will only accept the CD-ROM path.

This post describe about Dell personal All in one Printer A960 Color Ink-jet - Fax / copier / printer / scanner. If you are facing problem with Dell Printer A960 you can get Printer support services. The A960 is based on the Dell Personal All-in-One Printer A940. It maintains the print and scan quality of the A940, but also includes advanced features such as an automatic document feeder that lets customers fax, copy or scan up to 50 pages at a time, leaving them free to do more important tasks. Its standalone fax capability includes built-in memory, reducing the chances customers will miss a fax and or need to wait to send one.

Other technical features of the A960 include print resolutions up to 4800 dots per inch (dpi), and a 48-bit flatbed scanner with a maximum resolution of 19,200 dpi. Imaging and printing is further complemented with Dell Premium Photo Paper, which users can use to create high-resolution color prints in either 4x6 inch or 8.5x11 inch sizes.

In order to simplify the ink replenishment process, the A960 features the Dell Ink Management System, which monitors ink levels and proactively prompts users to order replacement cartridges. Once ordered, the cartridges are conveniently shipped directly to the customer, eliminating the time, cost and hassle of traveling to a local retailer.

Now I am going to discuss about how to connect a printer using web browser. With the Internet printing characteristic of Microsoft Windows XP, you can use your Web browser to connect to share printers on a print server that is running Microsoft Internet Information Services (IIS). Printing is implemented by way of the Internet Print Protocol (IPP), which is encapsulated in the Hypertext Transfer Protocol (HTTP). By typing the Uniform Resource Locator (URL) of a remote printer in the Address bar of your browser, you can connect to, and print from the printer in the same way as if it were attached to your own computer. In addition, get further printer support if you have Manage Printers permission for the printer, you can also pause or resume operation of the printer.

Steps To connect a printer using a Web browser:

1. Start Microsoft Internet Explorer.
2. In the Address bar, do one of the following:
o If you do not know the name of the printer to which you want to connect, type the following, where PrintServer is the name of the print server:

http://PrintServer/printers/

For example, to view a list of all printers that are located on a print server named MyPrintServer, type the following:

http://MyPrintServer/printers/

A list of all printers on the print server is displayed in your browser window. In the list of available printers, click the name of the printer that you want.

-OR-

o If you know the name of the printer to which you want to connect, type the URL of the printer by using the following format, where PrintServer is the name of the print server and Printer is the name the printer:

http://PrintServer/Printer/

For example, if you want to go directly the page of a printer that is named Laser that is shared from a server called MyPrintServer, type the following:
http://MyPrintServer/Laser/
3. In the browser window, a Web page opens in which the printer properties are displayed. Click the links to view more information about your printer, or perform a printer or document action.
4. To connect to the printer, click Connect under Printer Actions.

You are connected to the printer, and Windows installs the appropriate printer driver for your computer.

After the installation is complete, the icon for this printer is added to the Printers and Faxes folder on your computer. You can then use, monitor, and administer the printer as if it were attached to your computer.
Note: To connect to an Internet printer, you can also type the URL of the printer in any window or folder with an Address bar, such as Windows Explorer, My Computer, or the Printers and Faxes folder.

In Computer Printer Repair Blog today I am going to discuss about Printer support important topic, Windows cannot connect to the printer. Operation could not be completed (error 0x0000000d). And contain steps to troubleshoot these problems. To resolve this problem, modify the value of the Previous Names registry entry on the print server so that it contains valid data. To do this, follow these steps:
1. Click Start
, click Run, type regedit, and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\
3. On the File menu, click Export.
4. In the File name box, type printerName, and then click Save.
5. Right-click printerName.reg, and then click Edit.
6. Locate the sentence which starts with the "Previous Names" string, and then replace the sentence with the following text:
"Previous Names"=hex(7):00,00
7. On the File menu, click Save.
8. Exit Notepad.
9. Right-click the file that you saved in step 7, click Merge, and then click OK.
10. Restart the Print Spooler service. To do this, follow these steps:
a. Click Start
Collapse this imageExpand this image
, type services.msc in the Start Search box, and then click services.msc in the Programs list.
Collapse this imageExpand this image
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
b. Right-click Print Spooler, and then click Stop.
c. Right-click Print Spooler, and then click Start.
These steps provide positive steps to troubleshoot your problems. For more information you can use Microsoft Knowledge Base Articles

In this addition you found about how to share a printer to network.If you have a printer attached to your computer, you can share it with anyone on the same network. It doesn't matter what kind of printer it is, as long as the printer is installed on your computer and directly attached with a USB (universal serial bus) cable or other type of printer cable. Whoever you choose to share the printer with will be able to use it to print, provided they can locate your computer on the network.
Note Printers that are directly linked to a network rather than attached to a computer are available to anyone on the same network. Such printers must have a network port or wireless connection that allows them to connect directly to the network.

How To share a printer attached to your computer

1. Open Network and Sharing Center by clicking the Start button , clicking Control Panel, clicking Network and Internet, and then clicking Network and Sharing Center.
2. Click the arrow button next to Printer sharing to expand the section, click Turn on printer sharing, and then click Apply. Your printer is now shared on the network. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. If you are using a computer connected to a workgroup, click the arrow button next to Password protected sharing to expand this section, and then check to see if password-protected sharing is turned on or off. If it is turned on, only people with a user account and password for this computer will be able to access your printer. Turn this off if you want anyone on the network to be able to access the printer you are sharing. To change this setting, select the option you prefer, and then click Apply. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Note Anyone using this computer can already use any printer attached to the computer. Printer sharing allows you to share your printer with people using other computers on the network.

How To print using a shared printer

Follow these steps to connect to a shared printer over the network. You must know the name of the computer that has the printer attached to it. If you don't know this name, ask someone who uses that computer, or go to the other computer yourself and look it up. For information on how to find this name, see Find your computer name.
1. Click the Start button , and then, in the Search box, type \\ followed by the name of the computer with the shared printer you want to use (for example, \\mylaptop).
2. Press ENTER.
3. If Windows can find the computer on the network, a folder will open for the computer. Double-click Printers. If any shared printers are connected to this computer, they will appear here. If you don't see the shared printer you want to use, ask a person who uses that computer if the printer is connected, turned on, and shared with other users on the network.
4. Double-click the printer. Windows will automatically add the printer to your computer and install the printer driver. When the process is complete, click Next.
5. The printer should appear in your Printers folder. You can select this printer when you want to print a document or other type of file.
NoteIf Windows can't automatically find and install the printer driver that allows this shared printer to work with your computer, you have to install the driver before you will be able to print. For more information, see Find and install printer drivers.

Applies to: Home Basic, Home Premium, Business, Enterprise, Ultimate.
Which edition of Windows Vista am I using?

In addition you get tips for configure HP DeskJet 5550 Series Printer Support. You get info about how to configure your HP DeskJet Printer. This problem occurs when the HP DeskJet 5550 series printer driver version 5.0. Is installed using the Add Printer method. When the printer driver is installed using the Software first or Hardware Plug and Play method the Configuration tab is available and the option to access the features is available.
Resolutions
Use one of the following options to access the Configuration menu of the printer driver.
Uninstall then reinstall the printer driver
The Configuration tab is available from the Toolbox if the printer driver is uninstalled and then reinstalled using either Software first or Hardware Plug and Play installation process.
-OR-
Use the Printer Assistant to access the Configuration menu

1. Open the Printer Assistant by using one of the following methods.
* Click the HP DeskJet 5550 Printer Assistant icon or your desktop.
* Right-click the printer icon on your taskbar, then select Open HP DeskJet 5550 series Printer Assistant.
2. Click the Tools and Updates button.
3. Click the Printer maintenance button.
4. Click the Configure printer button.
5. Click Configure.
6. The HP 5550 series Configuration window will appear (see Figure 1). Enable or disable the desired feature.

One cannot do without printer in today’s time as we all need hard copies. Therefore selecting right printer is a difficult task in itself. So here is some help:-

Types of Printer

There are many types of printer, whether you need to print documents, photos, stickers, large banners or any other thing need to be printed, there is a printer for all situations.

• Card Printer – for printing plastic cards

• CD Printer – for printing labels directly onto the CD

• Check Printer – for printing text on blank checks

• DVD Printer – for printing labels directly on the DVD disc

• Inkjet Printer – usually used for basic printing needs (i.e. documents, photos, etc.) in the home, school or office.

• Laster Printer – has similar functions with the inkjet, only faster.

• Photo Printer – the printer especially designed and made for printing high-quality images.

• Portable Printer – for use with mobile devices like laptops and other mobile computers

• Postcard Printer – for printing images and text on postcards and other novelty papers.

• Poster Printer – for printing bigger media (i.e. posters, banners, etc.)

• Thermal Printer – typically used for printing receipts and labels

• Wireless Printer – utilizes Bluetooth technology to connect to your computer instead of traditional cables, which makes it ideal for small spaces with computers.

Before purchasing a printer

Your printing need can be any thing, be sure to notice the following feature when choosing a printer.

• Power source

• Connectivity

• Printing size

• Format (what it can print)

• Speed of printing

• Efficiency

• Paper types and sizes it can accommodate

• Security features

• System requirements (ensure your device is compatible with it)

• Capacity (how much it can print at a time and how much paper it can accommodate)

You face any kind of problem with your printer then go for Computer Printer Repair Canada

source:ezinearticles.com